Introduction个人简介

---

UEDA Tamon joined Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, College of Civil and Transportation Engineering, Shenzhen in November 2019 following his retirement as a professor at Hokkaido University.  His research interests are in numerical analysis of concrete and hybrid structures, prediction of life cycle of structures, upgrading of structures, seismic design and structural design methodology.  Prof Ueda did his D.Eng. at the University of Tokyo and PD at University of Washington.  He spent, from weeks to years, as visiting scholar at various academic institutions including the Asian Institute of Technology, Chulalongkorn University and Thammasat University in Thailand, Dalian University of Technology, Zhejiang University, Harbin University of Technology in China.  His research achievements earn him many awards including fib Medal of Merit, Thammasat University Honorary Award, JSCE International Lifetime Contribution Award.  He served as President of the Asian Concrete Federation (ACF), Chairman of ISO/TC71-SC7 Maintenance and Repair of Concrete Structures and past Vice President of JSCE. At present he is Chief Advisor and Acting Executive Director of ASEAN University Network/Southeast Asia Engineering Education Development Network (AUN/SEED-Net), fib Technical Council Member, Advisory Committee Chair of International Institute of FRP in Construction (IIFC), International Steering Committee Chair of East Asia and Pacific Conference on Structural Engineering (EASEC) and Chairman of Association of Civil Engineering Technology of Hokkaido.

Education Background教育背景

---

1978年04月～1982年11月  东京大学  土木工程专业  博士

1977年04月～1978年03月  东京大学  土木工程专业  硕士

1973年04月～1977年03月  东京大学  土木工程专业  学士

Experience工作经历

---

2019年11月至今  深圳大学土木与交通工程学院  特聘教授

2019年04月至今  北海道大学    名誉教授

2017年11月～2019年10月  深圳大学土木与交通工程学院   访问讲席教授

2016年07月～2017年10月  深圳大学土木与交通工程学院  访问教授

2015年07月～2015年08月  哈尔滨工业大学     特邀教授

2012年03月～2014年10月  浙江大学    客座教授

2011年07月～2013年10月  大连理工大学    客座教授

2004年04月～2019年09月  北海道大学    教授

1999年11月～2000年01月  泰国国立法政大学诗琳通国际理工学院 访问学者

1991年04月～2004年03月  北海道大学    副教授

1990年04月～1991年03月  东京大学    副教授

1987年04月～1990年04月  亚洲理工学院   副教授

1986年03月～1987年4月  东京大学    副教授

1984年05月～1986年02月  东京大学  讲师

1984年04月～1986年3月  関東学院大学 非常勤講師

1982年05月～1984年03月  华盛顿大学    博士后副研究员/助教

1981年12月～1983年03月  东京大学    副研究员

Research interests研究方向及兴趣

---

基础设施生命周期管理技术研究,如评估和预测结构性能和干预措施等

Sponsored Research Projects 科研项目

---

On-going 在研

1、广东省重点领域研发计划项目(85954/000001),新型 ICCP-SS 碳纤维复材海水海砂钢筋混凝土建筑结构关键技术研究,核心成员,在研。

2、国家科技部重点研发计划中国和日本科技联委会合作项目 (2018YFE0124900), 基于石墨烯/碳纤维改性水泥基材料和绿色能源综合 应用技术的环境自适应型道路体系研究, 核心成员, 在研。

Completed (major ones)已完成的主要项目

1、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Deterioration of interfacial bond property under combined effects and prediction of performance of members after intervention”, 2014-2016 (JPY 32,180,000)

2、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Development of general method for strengthening design with consideration of life cycle”, 2010-2013 (JPY 46,150,000)

3、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Durability design and conservation for concrete structures in cold region subjected to combined deterioration effects”, 2007-2010 (JPY 48,230,000)

4、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Study on technological method for reducing LCC of transportation-related facilities under environment with usage of anti-freezing agent”, 2004-2007 (JPY 42,900,000)

5、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Unified bond model for external bonded reinforcement”, 2001-2004 (JPY 15,100,000)

6、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Unified approach for prediction of shear capacity and ultimate deformation of concrete members retrofitted with various materials”, 2000-2003 (JPY 12,400,000)

7、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Study on retrofit design of concrete structures with new material”, 1996-98 (JPY 9,400,000)

8、Grant-in-Aid for Scientific Research (Kaken) of Japan, “Development of rational design method for steel-concrete sandwich structure”, 1994-96 (JPY 10,200,000)

9、Asia-Africa S & T Strategic Cooperation Promotion Program of JST, Japan, “Life cycle prediction and management of concrete structures”, 2009-2011 (JPY62,640,000)

10、The 2006 Construction Technology R&D Program, Korea, “Evaluating the concrete resistance to coupled deterioration with freezing and thawing along with

Publications代表性学术论文

---

Journals (first author, awarded) 第一作者获奖论文期刊

1、Tamon Ueda, “Material mechanical properties necessary for the structural intervention of concrete structures”, Engineering, Vol.5, Available online on 30 September 2019, pp.1131-1138, https://doi.org/10.1016/j.eng.2019.02.012.

2、Tamon Ueda, Hitoshi Furuuchi and Muhammad Aun Bashir, “Development of simple and rational connecting method -connection by concrete-filled steel box-”, Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE)), Vol.70, No.5, pp.II_2-II_19, 2014 (in Japanese).

3、Tamon Ueda, Muttaqin Hasan, Kohei Nagai, Yasuhiko Sato and Licheng Wang, “Mesoscale simulation of influence of frost damage on mechanical properties of concrete”, Journal of Materials in Civil Engineering, ASCE, Vol.21, No.6, June 2009, pp.244-252.

4、Tamon Ueda and Jianguo Dai, “Interface bond between FRP sheets and concrete substrates: properties, numerical modeling and roles in member behaviour”, Progress in Structural Engineering and Materials, Vol.7, No.1, pp.27-43, January-March 2005.

5、Tamon UEDA, Yasuhiko SATO, Tsunemasa ITO and Katsuhide NISHIZONO, “Shear deformation of reinforced concrete beam”

a) Journal of Concrete Structures, Pavements, JSCE, No.711/V-56, pp.205-215, August 2002.

b) Concrete Library International, JSCE, No.43, pp.9-23, June 2004.

6、Tamon Ueda, Ryuichi Yamaguchi, Kazuteru Shoji, and Yasuhiko Sato, “Study on behavior in tension of reinforced concrete members strengthened by carbon fiber sheet”, Journal of Composites for Construction, ASCE, Vol.6, Nr. 3, pp.168-174, August 2002.

7、Tamon Ueda and Yasuhiko Sato, “New approach for usage of continuous fiber as non-metallic reinforcement of concrete”, Structural Engineering International, International Association for Bridge and Structural Engineering (IABSE), Vol.12, No.2, May 2002, pp.111-116.

8、T. Ueda, M. Zahran and Y. Kakuta, “Shear fatigue behavior of steel-concrete sandwich beams”, Concrete Library International of JSCE, No.33, pp.83-111, June 1999

9、T. Ueda and H.D.E. Putro, "An analytical study of shear strength of prestressed concrete beams without shear reinforcement"

a) Prestressed Concrete, Vol.33, No.2, Mar. 1991, pp.60-65 (in Japanese)

b) Concrete Library International, JSCE, No.22, Dec. 1993, pp.47-54

10、T. Ueda and B. Stitmannatithum, "Shear strength of precast prestressed hollow slab with concrete topping", Structural Journal, American Concrete Institute, Vol.88, No.4, July-Aug. 1991, pp.402-410

11、T. Ueda, B. Stitmanaithum and S. Matupayont, "An experimental investigation on shear strength of bolt anchorage group", Structural Journal, American Concrete Institute, Vol.88, No.3, May-June 1991, pp.292-300

12、T. Ueda, S. Kitipornchai and L. Kai, "An experimental investigation of anchor bolts under shear", Journal of Structural Engineering, American Society of Civil Engineers, Vol.116, No.4, Apr. 1990, pp.910-924

13、T. Ueda, S. Kitipornchai and L. Kai, "An experimental investigation of anchor bolts under shear", Journal of Structural Engineering, ASCE, Vol.116, Issue 4, April 1990, pp.910-921

14、T. Ueda and Y. Tsuji, "Top-surface geometry of stay-in-place prestressed concrete panel", Proc. of JSCE, No. 384/V-7, Aug. 1987, pp.143-149 (in Japanese)

15、T. Ueda, I-J. Lin and N.M. Hawkins, "Beam bar anchorage in exterior column-beam connections", ACI Journal, Vol. 83, No. 3, May-June 1986, pp.412-431

16、T. Ueda and H. Okamura, "Behavior in shear of reinforced concrete beams under fatigue loading",

a) Journal of the Faculty of Engineering, University of Tokyo (B), Vol. XXXVII, No. 1, Mar. 1983, pp.17-48.

b) Concrete Library International, JSCE, Vol.2, 1984, pp37-69.

17、T. Ueda, S.A. Farghaly, M. Enomoto and H. Okamura, "Fatigue failure in shear of beam without web reinforcement -- influence of load range on fatigue strength in shear",

a) Concrete Journal, JCI, Vol. 20, No. 9, Sept. 1982, pp. 89-98 (in Japanese)

b) Festschrift, Prof. Dr Bruno Thurlimann zum 60 Geburtstag, June 1983, pp.518-523

Journals (co-author, last 5 years) 最近5年共同作者期刊论文

1、Miaochang Zhu, Ji-Hua Zhu, Tamon Ueda, Meini Su, Feng Xing, “A method for evaluating the bond behavior and anchorage length of embedded carbon yarn in the cementitious matrix”, Construction and Building Materials, Volume 255, 20 September 2020, 119067, 16 pages, https://doi.org/10.1016/j.conbuildmat.2020.119067.

2、Tidarut Jirawattanasomkul, Suched Likitlersuang, Nattamet Wuttiwannasak, Tamon Ueda, Dawei Zhang, Marin Shono, “Structural behaviour of pre-damaged reinforced concrete beams strengthened with natural fibre reinforced polymer composites”, Composite Structures, 244 (2020), 1123909, March 2020, 14 pages, doi.org/10.1016/j.compstruct.2020.112309.

3、Khuram Rashid, Madiha Ahmad, Tamon Ueda, Jun Deng, Kiran Aslam, Imran Nazir, Muhammad Azam Sarwar, “Experimental investigation of the bond strength between new to old concrete using different adhesive layers”, Construction and Building Materials, Vol.249, 2020, 13 pages, doi.org/10.1016/j.conbuildmat.2020.118798.

4、Jun He, Zhongyu Lu, Sirong Tan, Tamon Ueda, Yunfeng Pan, Jianhe Xie and Guijun Xian, “Effect of temperature variation and pre-sustained loading on the bond between basalt frp sheets and concrete”, Materials, Vol.13 (1530), 26 March 2020, 19 pages, doi:10.3390/ma13071530.

5、Yi Wang, Tamon Ueda, Fuyuan Gong, Dawei Zhang and Zhao Wang, “Experimental examination of electrical characteristics for portland cement mortar frost damage evaluation”, Materials, Vol.13 (1258), 10 March 2020, 22 pages, doi:10.3390/ma13051258.

6、Dawei Zhang, Haifeng Shi, Tamon Ueda, Weiliang Jin, “Effect of U-shaped anchorages on concrete cover separation in carbon fiber-reinforced polymer-strengthened beams with notches at the sheet end”, Structural Concrete, fib, 2020, pp.1-19, DOI: 10.1002/suco.201900388.

7、Ji-Hua Zhu; Zhi Wang, Mei-ni Su, Tamon Ueda and Feng Xing, “C-FRCM Jacket Confinement for RC Columns under Impressed Current Cathodic Protection”, Journal of Composites for Construction, 2020, 24(2), 7^th January 2020, 15 pages, DOI: 10.1061/(ASCE)CC.1943-5614.0001006.

8、Liang-Liang Wei, Ji-Hua Zhua, Tamon Ueda, Mei-Ni Su, Jun Liu, Wei Liu, Lu-Ping Tang, Feng Xing, “Tensile behaviour of carbon fabric reinforced cementitious matrix composites as both strengthening and anode materials”, Composite Structures, 234 (2020), 111675, November 2019, 10 pages, doi.org/10.1016/j.compstruct.2019.111675.

9、Mei-ni SU, Chaoqun ZENG, Wan-qian LI, Ji-Hua ZHU, Wei-hao LIN, Tamon UEDA, Feng XING “Flexural performance of corroded continuous RC beams rehabilitated by ICCP-SS”, Composite Structures, 232 (2020) 111556, October 2019, 14 pages, doi.org/10.1016/j.compstruct.2019.111556.

10、Saeid Mehrpay, Zhao Wang, Tamon Ueda, “Development and application of a new discrete element into simulation of nonlinear behavior of concrete”, Structural Concrete, September 2019, 22 pages, DOI: 10.1002/suco.201900059.

11、Hayato Shibao, Mahmudul Hasan Mizan, Tamon Ueda, Katsuichi Miyaguchi, and Jun Takahashi, “A study on effect of silica fume and surface penetrant on bonding strength for overlaying”, Journal of Asian Concrete Federation, Vol.5, No.1, June 2019, pp.1-14.

12、Tidarut Jirawattanasomkul, Tamon Ueda, Suched Likitlersuang, Dawei Zhang, Nat Hanwiboonwat, Nattamet Wuttiwannasak, and Krittapon Horsangchai, “Effect of natural fibre reinforced polymers on confined compressive strength of concrete”, Construction and Building Materials Vol.223, 2019, pp.156-164, doi.org/10.1016/j.conbuildmat.2019.06.217.

13、Zhao Wang, Dawei Zhang, Fuyuan Gong, Saeid Mehrpay and Tamon Ueda, “Mesoscale simulation of bond behaviors between concrete and reinforcement under the effect of frost damage with axisymmetric Rigid Body Spring Model”, Construction and Building Materials Vol.215, 2019, pp.886-897, doi.org/10.1016/j.conbuildmat.2019.04.232.

14、Zhao Wang, Fuyuan Gong, Dawei Zhang, Yi Wang, Tamon Ueda, “RBSM based analysis on mechanical degradation of non-air entrained concrete under frost action – A general prediction with various water cement ratio, lowest temperatures and FTC numbers”, Construction and Building Materials, Vol.211, 2019, pp.744-755, doi.org/10.1016/j.conbuildmat.2019.03.151.

15、Mei-ni Su,  Liangliang Wei, Ji-Hua Zhu, Tamon Ueda, Guan-ping Guo and Feng Xing, “Combined impressed current cathodic protection and frcm strengthening for corrosion-prone concrete structures”, Journal of Composites for Construction, ASCE, 23(4), 2019, pp.04019021-1 to 11, DOI: 10.1061/(ASCE)CC.1943-5614.0000949.

16、Khuram Rashid, Yi Wang, Tamon Ueda, “Influence of continuous and cyclic temperature durations on the performance of polymer cement mortar and its composite with concrete”, Composite Structures, Vol.215, 2019, pp.214-225, doi.org/10.1016/j.compstruct.2019.02.057.

17、Mei-ni SU, Liang-liang WEI, Zhi-wen ZENG, Tamon Ueda, Feng XING, Ji-Hua ZHU, “A solution for sea-sand reinforced concrete beams”, Construction and Building Materials, Vol.204, 2019, pp.586-596, doi.org/10.1016/j.conbuildmat.2019.01.146.

18、Yi Wang, Tamon Ueda, Fuyuan Gong, Dawei Zhang, “Meso-scale mechanical deterioration of mortar due to sodium chloride attack”, Cement and Concrete Composites, Vol.96, 2019, pp.163-173, doi.org/10.1016/j.cemconcomp.2018.11.021.

19、Linh Van Hong Bui, Boonchai Stitmannaithum and Tamon Ueda, “Ductility of concrete beams reinforced with both fiber-reinforced polymer and steel tension bars”, Journal of Advanced Concrete Technology, JCI, Vol.16, pp.531-548, November 2018, doi:10.3151/jact.16.531.

20、Chao Wu, Yang Pan, Tamon Ueda, “Characterization of the abrasion resistance and the acoustic wave attenuation of the engineered cementitious composites for runway pavement”, Construction and Building Materials, Vol.174, 2018, pp.537-546, doi.org/10.1016/j.conbuildmat.2018.04.152.

21、Fuyuan Gong, Tamon Ueda, Dawei Zhang, “Two‐dimensional rigid body spring method based micro‐mesoscale study of mechanical strengthening/damaging effects to concrete by frost action”, Structural Concrete, Vol.19, No.4, fib, 20 February 2018, pp.1131-1145, doi.org/10.1002/suco.201700200.

22、Ji-hua Zhu, Mei-ni Su, Jia-yi Huang, Tamon Ueda, Feng Xing, “The ICCP-SS technique for retrofitting reinforced concrete compressive members subjected to corrosion”, Construction and Building Materials, Vol. 167, February 2018, pp.669–679, doi.org/10.1016/j.conbuildmat.2018.01.096.

23、Dawei Zhang, Yuxi Zhao, Weiliang Jin, Tamon Ueda, Hiroshi Nakai, “Shear strengthening of corroded reinforced concrete columns using pet fiber based composites”, Engineering Structures, Vol.153, December 2017, pp.757-765, doi.org/10.1016/j.engstruct.2017.09.030.

24、Zhao Wang, Fuyuan Gong, Dawei Zhang, Hiroshi Hayashida and Tamon Ueda, “Mesoscale simulation of concrete behavior with non-uniform frost damage with verification by CT imaging”, Construction and Building Materials, Vol.157, December 2017, pp.203-213, doi.org/10.1016/j.conbuildmat.2017.09.040.

25、Linh V. H. Bui, Boonchai Stitmannaithum and Tamon Ueda, “Mechanical performances of concrete beams with hybrid usage of steel and FRP tension reinforcement”, Computers and Concrete, 20(4), October 2017, pp.391-407, DOI: 10.12989/cac.2017.20.4.391.

26、Dawei Zhang, Khuram Rashid, Bo Wang and Tamon Ueda, “Experimental and analytical investigation of crack spacing and width for overlaid RC beams at elevated temperatures”, Journal of Structural Engineering, ASCE, September 2017, 143 (12), pp. 04017168-1 to 04017168-9, doi.org/10.1061/(ASCE)ST.1943-541X.0001910.

27、Yi Wang, Fuyuan Gong, Dawei Zhang, Tamon Ueda, “Estimation of ice formation in mortar saturated with sodium chloride solutions”, Construction and Building Materials, Volume 144, 30 July 2017, pp.238-251, doi.org/10.1016/j.conbuildmat.2017.03.073.

28、Fuyuan Gong, Tamon Ueda, Yi Wang, Dawei Zhang and Zhao Wang, “Mesoscale simulation of fatigue behavior of concrete materials damaged by freeze-thaw cycles”, Construction and Building Materials, Vol.144, 30 July 2017, pp.702-716, doi.org/10.1016/j.conbuildmat.2017.03.207.

29、Fuyuan Gong, Yi Wang, Tamon Ueda, and Dawei Zhang, “Modeling and mesoscale simulation of ice-strengthened mechanical properties of concrete at low temperatures”, Journal of Engineering Mechanics, ASCE, Vol.143, Issue 6, June 2017, page: 04017022-1 to 04017022-16, DOI: 10.1061/(ASCE)EM.1943-7889.0001219.

30、Justin Shrestha, Dawei Zhang and Tamon Ueda, “Bond-slip models for FRP-concrete interfaces subjected to moisture conditions”, International Journal of Polymer Science, Volume 2017 (2017), Article ID 4031565, 14 pages, https://doi.org/10.1155/2017/4031565.

31、Dawei Zhang, Yuxi Zhao, Tamon Ueda, Xiangmin Li and Qingfeng Xu, “CFRP strengthened RC beams with pre-strengthening non-uniform reinforcement corrosion subjected to post-strengthening wetting/drying cycles”, Engineering Structures, Volume 127, 15 November 2016, pp.331-343, http://dx.doi.org/10.1016/j.engstruct.2016.08.051.

32、Licheng Wang, Jiuwen Bao, Tamon Ueda, “Prediction of mass transport in cracked-unsaturated concrete by mesoscale lattice model”, Ocean Engineering, Volume 127, 15 November 2016, pp.144-157, http://dx.doi.org/10.1016/j.oceaneng.2016.09.044.

33、Khuram Rashid, Dawei Zhang, Tamon Ueda, Weiliang Jin, “Investigation on concrete-PCM interface under elevated temperature: At material level and member level”, Construction and Building Materials, Volume 125, 30 October 2016, pp.465-478, http://dx.doi.org/10.1016/j.conbuildmat.2016.08.067.

34、Rashid, K., Ueda, T. and Zhang, D., “Study on shear behavior of concrete-polymer cement mortar at elevated temperature”, Civil Engineering Dimension, Vol. 18, No. 2, September 2016, 93-102, DOI: 10.9744/CED.18.2.93-102.

35、Yuxi Zhao, Dawei Zhang, Shijun Shen and Tamon Ueda, “Axial loading capacity of concrete-jacketed RC columns with pre- and post-corrosion damage”, Structural Concrete, Journal of the fib, Vol.17, No.3, pp.355-364, September 2016, DOI: 10.1002/suco.201400113.

36、Ye Qian, Dawei Zhang and Tamon Ueda, “Interfacial tensile bond between substrate concrete and repairing mortar under freeze-thaw cycles”, Journal of Advanced Concrete Technology, Japan Concrete Institute, Vol.14, pp.421-432, August 2016, doi:10.3151/jact.14.421.

37、Yi Wang, Fuyuan Gong, Dawei Zhang and Tamon Ueda, “Mesoscale study of water transport in mortar influenced by sodium chloride”, Journal of Asian Concrete Federation, 2 (1), pp.1-14, Published online on 05 July 2016, doi.org/10.18702/acf.2016.06.2.1.1.

38、Muhammad Aun Bashir, Hitoshi Furuuchi, Tamon Ueda, M. Nauman Bashir, “Numerical simulation of axial anchorage capacity of concrete-filled steel box footing”, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer, 8 pages, Published online on 29 June 2016, DOI 10.1007/s40996-016-0019-y.

39、Ataur Rahman and Tamon Ueda, “In-plane shear strength of masonry wall strengthened by two distinct FRPs”, Journal of Structural Engineering, JSCE, Vol.62A, March 2016, pp.915-925.

40、Naphon Krintrakul, Tamon Ueda, Jun Takahashi, Seiji Fujima, Hitoshi Furuuchi, “Improvement of debonding strength with consideration of adhesive layer property and its FEM analysis”, Journal of Structural Engineering, JSCE, Vol.62A, March 2016, pp.23-31.

41、Shrestha, J., Zhang, D., and Ueda, T., “Durability performances of carbon fiber–reinforced polymer and concrete-bonded systems under moisture conditions.” Journal of Composites for Construction, Vol.20, Issue 5, October 2016, 04016023-1 to 12 (12 pages), DOI: 10.1061/(ASCE)CC.1943-5614.0000674.

42、Rahman, A. and Ueda, T., “In-plane shear performance of masonry walls after strengthening by two different FRPs.” Journal of Composites for Construction, Vol.20, Issue 5, October 2016, 04016019-1 to 14 (14 pages), DOI: 10.1061/(ASCE)CC.1943-5614.0000661.

43、Yi Wang, Fuyuan Gong, Dawei Zhang, Tamon Ueda, “Estimation of ice content in mortar based on electrical measurements under freeze-thaw cycle”, Journal of Advanced Concrete Technology, JCI, Vol.14, No.2, February 2016, pp.35-46, doi:10.3151/jact.14.35.

44、Fuyuan Gong, Dawei Zhang, Evdon Sicat, and Tamon Ueda, “Closure to empirical estimation of pore size distribution in cement, mortar, and concrete”, Journal of Materials in Civil Engineering, ASCE, Vol.27, No.11, November 2015, pp. 07015008-1-2, DOI: 10.1061/(ASCE)MT.1943-5533.0000945

45、Khuram Rashid, Tamon Ueda, Dawei Zhang, Katsushi Miyaguchi and Hiroshi Nakai, “Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions”, Construction and Building Materials, Vol.94, September 2015, pp.414-425, doi:10.1016/j.conbuildmat.2015.07.035.

46、Dawei Zhang, Shijun Shen, Yuxi Zhao, Weiliang Jin and Tamon Ueda, “Cracking behavior of cfrp laminate-strengthened rc beams with premechanical and postmechanical environmental damage”, Journal of Composites for Construction, ASCE, 20 (4), August 2015, pp. 04014066-1 to 10, DOI: 10.1061/(ASCE)CC.1943-5614.0000522.

47、Fuyuan Gong, Yi Wang, Dawei Zhang and Tamon Ueda, “Mesoscale simulation of deformation for mortar and concrete under cyclic freezing and thawing stress”, Journal of Advanced Concrete Technology, Vol.13, 291-304, June 2015, doi:10.3151/jact.13.291.

48、Fuyuan Gong, Evdon Sicat, Dawei Zhang and Tamon Ueda, “Stress analysis for concrete materials under multiple freeze-thaw cycles”, Journal of Advanced Concrete Technology, Vol.13, 124-134, April 2015, doi:10.3151/jact.13.124.

Journals (awarded)获奖期刊论文

1、Fuyuan Gong, Evdon Sicat, Tamon Ueda, Dawei Zhang, “Meso-scale mechanical model for mortar deformation under freeze thaw cycles”, Journal of Advanced Concrete Technology, Vol.11, No.2, February 2013, pp.49-60, doi:10.3151/jact.11.49.

2、Licheng Wang and Tamon Ueda, “Mesoscale modelling of the chloride diffusion in cracks and cracked concrete”, Advanced Concrete Technology, Vol.9, No.3, October 2011, pp.241-249

3、Mohamed ZAKARIA, Tamon UEDA and Zhimin WU, “Evaluating and proposing prediction models of shear crack width in concrete beams”, Journal of Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures), Vol.67, No.2, March 2011, pp.245-263.

4、Mohamed ZAKARIA, Tamon UEDA, Zhimin WU and Liang MENG, “experimental investigation on shear cracking behavior in reinforced concrete beams with shear reinforcement”, Journal of Advanced Concrete Technology, Vol.7, No.1, February 2009, pp.79-96.

5、Jianguo Dai, Tamon Ueda and Yasuhiko Sato, “Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method”, Journal of Composites for Construction, ASCE, Volume 9, No.1, January/February 2005, pp.52-62.

6、Kohei Nagai, Yasuhiko Sato and Tamon Ueda, “Mesoscopic simulation of failure of mortar and concrete by 2D RBSM”, Journal of Advanced Concrete Technology, JCI, Vol.2, No.3, September 2004, pp.327-341.

7、Roshan Tuladhar, Yoshinori Utsunomiya and Tamon Ueda, “New flexible system of transverse reinforcement for RC piers”, Advances in Structural Engineering, Vol.6, No.3, pp.215-230, 2003.

8、H. Arai, M. Fujita, K. Umezu, H. Fushita and T. Ueda, “Fretting fatigue characteristics in the curved layout of large-capacity prestressing strands”, Journal of Materials, Concrete Structures and Pavements, JSCE, No.627/V-44, pp.205-222, Aug. 1999 (in Japanese)

9、Y. Sato, T. Ueda and Y. Kakuta, “Qualitative evaluation of shear resisting behavior of concrete beams reinforced with FRP rods by finite element analysis”,

     a) Journal of Materials, Concrete Structures and Pavements, JSCE, No.484/V-22, Feb. 1994, pp.51-60 (in Japanese)

     b) Concrete Library International, JSCE, No.24, Dec. 1994, pp.193-209

Journals (first author, awarded) 第一作者获奖论文期刊

1、Tamon Ueda, “Material mechanical properties necessary for the structural intervention of concrete structures”, Engineering, Vol.5, Available online on 30 September 2019, pp.1131-1138, https://doi.org/10.1016/j.eng.2019.02.012.

2、Tamon Ueda, Hitoshi Furuuchi and Muhammad Aun Bashir, “Development of simple and rational connecting method -connection by concrete-filled steel box-”, Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE)), Vol.70, No.5, pp.II_2-II_19, 2014 (in Japanese).

3、Tamon Ueda, Muttaqin Hasan, Kohei Nagai, Yasuhiko Sato and Licheng Wang, “Mesoscale simulation of influence of frost damage on mechanical properties of concrete”, Journal of Materials in Civil Engineering, ASCE, Vol.21, No.6, June 2009, pp.244-252.

4、Tamon Ueda and Jianguo Dai, “Interface bond between FRP sheets and concrete substrates: properties, numerical modeling and roles in member behaviour”, Progress in Structural Engineering and Materials, Vol.7, No.1, pp.27-43, January-March 2005.

5、Tamon UEDA, Yasuhiko SATO, Tsunemasa ITO and Katsuhide NISHIZONO, “Shear deformation of reinforced concrete beam”

a) Journal of Concrete Structures, Pavements, JSCE, No.711/V-56, pp.205-215, August 2002.

b) Concrete Library International, JSCE, No.43, pp.9-23, June 2004.

6、Tamon Ueda, Ryuichi Yamaguchi, Kazuteru Shoji, and Yasuhiko Sato, “Study on behavior in tension of reinforced concrete members strengthened by carbon fiber sheet”, Journal of Composites for Construction, ASCE, Vol.6, Nr. 3, pp.168-174, August 2002.

7、Tamon Ueda and Yasuhiko Sato, “New approach for usage of continuous fiber as non-metallic reinforcement of concrete”, Structural Engineering International, International Association for Bridge and Structural Engineering (IABSE), Vol.12, No.2, May 2002, pp.111-116.

8、T. Ueda, M. Zahran and Y. Kakuta, “Shear fatigue behavior of steel-concrete sandwich beams”, Concrete Library International of JSCE, No.33, pp.83-111, June 1999

9、T. Ueda and H.D.E. Putro, "An analytical study of shear strength of prestressed concrete beams without shear reinforcement"

a) Prestressed Concrete, Vol.33, No.2, Mar. 1991, pp.60-65 (in Japanese)

b) Concrete Library International, JSCE, No.22, Dec. 1993, pp.47-54

10、T. Ueda and B. Stitmannatithum, "Shear strength of precast prestressed hollow slab with concrete topping", Structural Journal, American Concrete Institute, Vol.88, No.4, July-Aug. 1991, pp.402-410

11、T. Ueda, B. Stitmanaithum and S. Matupayont, "An experimental investigation on shear strength of bolt anchorage group", Structural Journal, American Concrete Institute, Vol.88, No.3, May-June 1991, pp.292-300

12、T. Ueda, S. Kitipornchai and L. Kai, "An experimental investigation of anchor bolts under shear", Journal of Structural Engineering, American Society of Civil Engineers, Vol.116, No.4, Apr. 1990, pp.910-924

13、T. Ueda, S. Kitipornchai and L. Kai, "An experimental investigation of anchor bolts under shear", Journal of Structural Engineering, ASCE, Vol.116, Issue 4, April 1990, pp.910-921

14、T. Ueda and Y. Tsuji, "Top-surface geometry of stay-in-place prestressed concrete panel", Proc. of JSCE, No. 384/V-7, Aug. 1987, pp.143-149 (in Japanese)

15、T. Ueda, I-J. Lin and N.M. Hawkins, "Beam bar anchorage in exterior column-beam connections", ACI Journal, Vol. 83, No. 3, May-June 1986, pp.412-431

16、T. Ueda and H. Okamura, "Behavior in shear of reinforced concrete beams under fatigue loading",

a) Journal of the Faculty of Engineering, University of Tokyo (B), Vol. XXXVII, No. 1, Mar. 1983, pp.17-48.

b) Concrete Library International, JSCE, Vol.2, 1984, pp37-69.

17、T. Ueda, S.A. Farghaly, M. Enomoto and H. Okamura, "Fatigue failure in shear of beam without web reinforcement -- influence of load range on fatigue strength in shear",

a) Concrete Journal, JCI, Vol. 20, No. 9, Sept. 1982, pp. 89-98 (in Japanese)

b) Festschrift, Prof. Dr Bruno Thurlimann zum 60 Geburtstag, June 1983, pp.518-523

Journals (co-author, last 5 years) 最近5年共同作者期刊论文

1、Miaochang Zhu, Ji-Hua Zhu, Tamon Ueda, Meini Su, Feng Xing, “A method for evaluating the bond behavior and anchorage length of embedded carbon yarn in the cementitious matrix”, Construction and Building Materials, Volume 255, 20 September 2020, 119067, 16 pages, https://doi.org/10.1016/j.conbuildmat.2020.119067.

2、Tidarut Jirawattanasomkul, Suched Likitlersuang, Nattamet Wuttiwannasak, Tamon Ueda, Dawei Zhang, Marin Shono, “Structural behaviour of pre-damaged reinforced concrete beams strengthened with natural fibre reinforced polymer composites”, Composite Structures, 244 (2020), 1123909, March 2020, 14 pages, doi.org/10.1016/j.compstruct.2020.112309.

3、Khuram Rashid, Madiha Ahmad, Tamon Ueda, Jun Deng, Kiran Aslam, Imran Nazir, Muhammad Azam Sarwar, “Experimental investigation of the bond strength between new to old concrete using different adhesive layers”, Construction and Building Materials, Vol.249, 2020, 13 pages, doi.org/10.1016/j.conbuildmat.2020.118798.

4、Jun He, Zhongyu Lu, Sirong Tan, Tamon Ueda, Yunfeng Pan, Jianhe Xie and Guijun Xian, “Effect of temperature variation and pre-sustained loading on the bond between basalt frp sheets and concrete”, Materials, Vol.13 (1530), 26 March 2020, 19 pages, doi:10.3390/ma13071530.

5、Yi Wang, Tamon Ueda, Fuyuan Gong, Dawei Zhang and Zhao Wang, “Experimental examination of electrical characteristics for portland cement mortar frost damage evaluation”, Materials, Vol.13 (1258), 10 March 2020, 22 pages, doi:10.3390/ma13051258.

6、Dawei Zhang, Haifeng Shi, Tamon Ueda, Weiliang Jin, “Effect of U-shaped anchorages on concrete cover separation in carbon fiber-reinforced polymer-strengthened beams with notches at the sheet end”, Structural Concrete, fib, 2020, pp.1-19, DOI: 10.1002/suco.201900388.

7、Ji-Hua Zhu; Zhi Wang, Mei-ni Su, Tamon Ueda and Feng Xing, “C-FRCM Jacket Confinement for RC Columns under Impressed Current Cathodic Protection”, Journal of Composites for Construction, 2020, 24(2), 7^th January 2020, 15 pages, DOI: 10.1061/(ASCE)CC.1943-5614.0001006.

8、Liang-Liang Wei, Ji-Hua Zhua, Tamon Ueda, Mei-Ni Su, Jun Liu, Wei Liu, Lu-Ping Tang, Feng Xing, “Tensile behaviour of carbon fabric reinforced cementitious matrix composites as both strengthening and anode materials”, Composite Structures, 234 (2020), 111675, November 2019, 10 pages, doi.org/10.1016/j.compstruct.2019.111675.

9、Mei-ni SU, Chaoqun ZENG, Wan-qian LI, Ji-Hua ZHU, Wei-hao LIN, Tamon UEDA, Feng XING “Flexural performance of corroded continuous RC beams rehabilitated by ICCP-SS”, Composite Structures, 232 (2020) 111556, October 2019, 14 pages, doi.org/10.1016/j.compstruct.2019.111556.

10、Saeid Mehrpay, Zhao Wang, Tamon Ueda, “Development and application of a new discrete element into simulation of nonlinear behavior of concrete”, Structural Concrete, September 2019, 22 pages, DOI: 10.1002/suco.201900059.

11、Hayato Shibao, Mahmudul Hasan Mizan, Tamon Ueda, Katsuichi Miyaguchi, and Jun Takahashi, “A study on effect of silica fume and surface penetrant on bonding strength for overlaying”, Journal of Asian Concrete Federation, Vol.5, No.1, June 2019, pp.1-14.

12、Tidarut Jirawattanasomkul, Tamon Ueda, Suched Likitlersuang, Dawei Zhang, Nat Hanwiboonwat, Nattamet Wuttiwannasak, and Krittapon Horsangchai, “Effect of natural fibre reinforced polymers on confined compressive strength of concrete”, Construction and Building Materials Vol.223, 2019, pp.156-164, doi.org/10.1016/j.conbuildmat.2019.06.217.

13、Zhao Wang, Dawei Zhang, Fuyuan Gong, Saeid Mehrpay and Tamon Ueda, “Mesoscale simulation of bond behaviors between concrete and reinforcement under the effect of frost damage with axisymmetric Rigid Body Spring Model”, Construction and Building Materials Vol.215, 2019, pp.886-897, doi.org/10.1016/j.conbuildmat.2019.04.232.

14、Zhao Wang, Fuyuan Gong, Dawei Zhang, Yi Wang, Tamon Ueda, “RBSM based analysis on mechanical degradation of non-air entrained concrete under frost action – A general prediction with various water cement ratio, lowest temperatures and FTC numbers”, Construction and Building Materials, Vol.211, 2019, pp.744-755, doi.org/10.1016/j.conbuildmat.2019.03.151.

15、Mei-ni Su,  Liangliang Wei, Ji-Hua Zhu, Tamon Ueda, Guan-ping Guo and Feng Xing, “Combined impressed current cathodic protection and frcm strengthening for corrosion-prone concrete structures”, Journal of Composites for Construction, ASCE, 23(4), 2019, pp.04019021-1 to 11, DOI: 10.1061/(ASCE)CC.1943-5614.0000949.

16、Khuram Rashid, Yi Wang, Tamon Ueda, “Influence of continuous and cyclic temperature durations on the performance of polymer cement mortar and its composite with concrete”, Composite Structures, Vol.215, 2019, pp.214-225, doi.org/10.1016/j.compstruct.2019.02.057.

17、Mei-ni SU, Liang-liang WEI, Zhi-wen ZENG, Tamon Ueda, Feng XING, Ji-Hua ZHU, “A solution for sea-sand reinforced concrete beams”, Construction and Building Materials, Vol.204, 2019, pp.586-596, doi.org/10.1016/j.conbuildmat.2019.01.146.

18、Yi Wang, Tamon Ueda, Fuyuan Gong, Dawei Zhang, “Meso-scale mechanical deterioration of mortar due to sodium chloride attack”, Cement and Concrete Composites, Vol.96, 2019, pp.163-173, doi.org/10.1016/j.cemconcomp.2018.11.021.

19、Linh Van Hong Bui, Boonchai Stitmannaithum and Tamon Ueda, “Ductility of concrete beams reinforced with both fiber-reinforced polymer and steel tension bars”, Journal of Advanced Concrete Technology, JCI, Vol.16, pp.531-548, November 2018, doi:10.3151/jact.16.531.

20、Chao Wu, Yang Pan, Tamon Ueda, “Characterization of the abrasion resistance and the acoustic wave attenuation of the engineered cementitious composites for runway pavement”, Construction and Building Materials, Vol.174, 2018, pp.537-546, doi.org/10.1016/j.conbuildmat.2018.04.152.

21、Fuyuan Gong, Tamon Ueda, Dawei Zhang, “Two‐dimensional rigid body spring method based micro‐mesoscale study of mechanical strengthening/damaging effects to concrete by frost action”, Structural Concrete, Vol.19, No.4, fib, 20 February 2018, pp.1131-1145, doi.org/10.1002/suco.201700200.

22、Ji-hua Zhu, Mei-ni Su, Jia-yi Huang, Tamon Ueda, Feng Xing, “The ICCP-SS technique for retrofitting reinforced concrete compressive members subjected to corrosion”, Construction and Building Materials, Vol. 167, February 2018, pp.669–679, doi.org/10.1016/j.conbuildmat.2018.01.096.

23、Dawei Zhang, Yuxi Zhao, Weiliang Jin, Tamon Ueda, Hiroshi Nakai, “Shear strengthening of corroded reinforced concrete columns using pet fiber based composites”, Engineering Structures, Vol.153, December 2017, pp.757-765, doi.org/10.1016/j.engstruct.2017.09.030.

24、Zhao Wang, Fuyuan Gong, Dawei Zhang, Hiroshi Hayashida and Tamon Ueda, “Mesoscale simulation of concrete behavior with non-uniform frost damage with verification by CT imaging”, Construction and Building Materials, Vol.157, December 2017, pp.203-213, doi.org/10.1016/j.conbuildmat.2017.09.040.

25、Linh V. H. Bui, Boonchai Stitmannaithum and Tamon Ueda, “Mechanical performances of concrete beams with hybrid usage of steel and FRP tension reinforcement”, Computers and Concrete, 20(4), October 2017, pp.391-407, DOI: 10.12989/cac.2017.20.4.391.

26、Dawei Zhang, Khuram Rashid, Bo Wang and Tamon Ueda, “Experimental and analytical investigation of crack spacing and width for overlaid RC beams at elevated temperatures”, Journal of Structural Engineering, ASCE, September 2017, 143 (12), pp. 04017168-1 to 04017168-9, doi.org/10.1061/(ASCE)ST.1943-541X.0001910.

27、Yi Wang, Fuyuan Gong, Dawei Zhang, Tamon Ueda, “Estimation of ice formation in mortar saturated with sodium chloride solutions”, Construction and Building Materials, Volume 144, 30 July 2017, pp.238-251, doi.org/10.1016/j.conbuildmat.2017.03.073.

28、Fuyuan Gong, Tamon Ueda, Yi Wang, Dawei Zhang and Zhao Wang, “Mesoscale simulation of fatigue behavior of concrete materials damaged by freeze-thaw cycles”, Construction and Building Materials, Vol.144, 30 July 2017, pp.702-716, doi.org/10.1016/j.conbuildmat.2017.03.207.

29、Fuyuan Gong, Yi Wang, Tamon Ueda, and Dawei Zhang, “Modeling and mesoscale simulation of ice-strengthened mechanical properties of concrete at low temperatures”, Journal of Engineering Mechanics, ASCE, Vol.143, Issue 6, June 2017, page: 04017022-1 to 04017022-16, DOI: 10.1061/(ASCE)EM.1943-7889.0001219.

30、Justin Shrestha, Dawei Zhang and Tamon Ueda, “Bond-slip models for FRP-concrete interfaces subjected to moisture conditions”, International Journal of Polymer Science, Volume 2017 (2017), Article ID 4031565, 14 pages, https://doi.org/10.1155/2017/4031565.

31、Dawei Zhang, Yuxi Zhao, Tamon Ueda, Xiangmin Li and Qingfeng Xu, “CFRP strengthened RC beams with pre-strengthening non-uniform reinforcement corrosion subjected to post-strengthening wetting/drying cycles”, Engineering Structures, Volume 127, 15 November 2016, pp.331-343, http://dx.doi.org/10.1016/j.engstruct.2016.08.051.

32、Licheng Wang, Jiuwen Bao, Tamon Ueda, “Prediction of mass transport in cracked-unsaturated concrete by mesoscale lattice model”, Ocean Engineering, Volume 127, 15 November 2016, pp.144-157, http://dx.doi.org/10.1016/j.oceaneng.2016.09.044.

33、Khuram Rashid, Dawei Zhang, Tamon Ueda, Weiliang Jin, “Investigation on concrete-PCM interface under elevated temperature: At material level and member level”, Construction and Building Materials, Volume 125, 30 October 2016, pp.465-478, http://dx.doi.org/10.1016/j.conbuildmat.2016.08.067.

34、Rashid, K., Ueda, T. and Zhang, D., “Study on shear behavior of concrete-polymer cement mortar at elevated temperature”, Civil Engineering Dimension, Vol. 18, No. 2, September 2016, 93-102, DOI: 10.9744/CED.18.2.93-102.

35、Yuxi Zhao, Dawei Zhang, Shijun Shen and Tamon Ueda, “Axial loading capacity of concrete-jacketed RC columns with pre- and post-corrosion damage”, Structural Concrete, Journal of the fib, Vol.17, No.3, pp.355-364, September 2016, DOI: 10.1002/suco.201400113.

36、Ye Qian, Dawei Zhang and Tamon Ueda, “Interfacial tensile bond between substrate concrete and repairing mortar under freeze-thaw cycles”, Journal of Advanced Concrete Technology, Japan Concrete Institute, Vol.14, pp.421-432, August 2016, doi:10.3151/jact.14.421.

37、Yi Wang, Fuyuan Gong, Dawei Zhang and Tamon Ueda, “Mesoscale study of water transport in mortar influenced by sodium chloride”, Journal of Asian Concrete Federation, 2 (1), pp.1-14, Published online on 05 July 2016, doi.org/10.18702/acf.2016.06.2.1.1.

38、Muhammad Aun Bashir, Hitoshi Furuuchi, Tamon Ueda, M. Nauman Bashir, “Numerical simulation of axial anchorage capacity of concrete-filled steel box footing”, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer, 8 pages, Published online on 29 June 2016, DOI 10.1007/s40996-016-0019-y.

39、Ataur Rahman and Tamon Ueda, “In-plane shear strength of masonry wall strengthened by two distinct FRPs”, Journal of Structural Engineering, JSCE, Vol.62A, March 2016, pp.915-925.

40、Naphon Krintrakul, Tamon Ueda, Jun Takahashi, Seiji Fujima, Hitoshi Furuuchi, “Improvement of debonding strength with consideration of adhesive layer property and its FEM analysis”, Journal of Structural Engineering, JSCE, Vol.62A, March 2016, pp.23-31.

41、Shrestha, J., Zhang, D., and Ueda, T., “Durability performances of carbon fiber–reinforced polymer and concrete-bonded systems under moisture conditions.” Journal of Composites for Construction, Vol.20, Issue 5, October 2016, 04016023-1 to 12 (12 pages), DOI: 10.1061/(ASCE)CC.1943-5614.0000674.

42、Rahman, A. and Ueda, T., “In-plane shear performance of masonry walls after strengthening by two different FRPs.” Journal of Composites for Construction, Vol.20, Issue 5, October 2016, 04016019-1 to 14 (14 pages), DOI: 10.1061/(ASCE)CC.1943-5614.0000661.

43、Yi Wang, Fuyuan Gong, Dawei Zhang, Tamon Ueda, “Estimation of ice content in mortar based on electrical measurements under freeze-thaw cycle”, Journal of Advanced Concrete Technology, JCI, Vol.14, No.2, February 2016, pp.35-46, doi:10.3151/jact.14.35.

44、Fuyuan Gong, Dawei Zhang, Evdon Sicat, and Tamon Ueda, “Closure to empirical estimation of pore size distribution in cement, mortar, and concrete”, Journal of Materials in Civil Engineering, ASCE, Vol.27, No.11, November 2015, pp. 07015008-1-2, DOI: 10.1061/(ASCE)MT.1943-5533.0000945

45、Khuram Rashid, Tamon Ueda, Dawei Zhang, Katsushi Miyaguchi and Hiroshi Nakai, “Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions”, Construction and Building Materials, Vol.94, September 2015, pp.414-425, doi:10.1016/j.conbuildmat.2015.07.035.

46、Dawei Zhang, Shijun Shen, Yuxi Zhao, Weiliang Jin and Tamon Ueda, “Cracking behavior of cfrp laminate-strengthened rc beams with premechanical and postmechanical environmental damage”, Journal of Composites for Construction, ASCE, 20 (4), August 2015, pp. 04014066-1 to 10, DOI: 10.1061/(ASCE)CC.1943-5614.0000522.

47、Fuyuan Gong, Yi Wang, Dawei Zhang and Tamon Ueda, “Mesoscale simulation of deformation for mortar and concrete under cyclic freezing and thawing stress”, Journal of Advanced Concrete Technology, Vol.13, 291-304, June 2015, doi:10.3151/jact.13.291.

48、Fuyuan Gong, Evdon Sicat, Dawei Zhang and Tamon Ueda, “Stress analysis for concrete materials under multiple freeze-thaw cycles”, Journal of Advanced Concrete Technology, Vol.13, 124-134, April 2015, doi:10.3151/jact.13.124.

Journals (awarded)获奖期刊论文

1、Fuyuan Gong, Evdon Sicat, Tamon Ueda, Dawei Zhang, “Meso-scale mechanical model for mortar deformation under freeze thaw cycles”, Journal of Advanced Concrete Technology, Vol.11, No.2, February 2013, pp.49-60, doi:10.3151/jact.11.49.

2、Licheng Wang and Tamon Ueda, “Mesoscale modelling of the chloride diffusion in cracks and cracked concrete”, Advanced Concrete Technology, Vol.9, No.3, October 2011, pp.241-249

3、Mohamed ZAKARIA, Tamon UEDA and Zhimin WU, “Evaluating and proposing prediction models of shear crack width in concrete beams”, Journal of Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures), Vol.67, No.2, March 2011, pp.245-263.

4、Mohamed ZAKARIA, Tamon UEDA, Zhimin WU and Liang MENG, “experimental investigation on shear cracking behavior in reinforced concrete beams with shear reinforcement”, Journal of Advanced Concrete Technology, Vol.7, No.1, February 2009, pp.79-96.

5、Jianguo Dai, Tamon Ueda and Yasuhiko Sato, “Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method”, Journal of Composites for Construction, ASCE, Volume 9, No.1, January/February 2005, pp.52-62.

6、Kohei Nagai, Yasuhiko Sato and Tamon Ueda, “Mesoscopic simulation of failure of mortar and concrete by 2D RBSM”, Journal of Advanced Concrete Technology, JCI, Vol.2, No.3, September 2004, pp.327-341.

7、Roshan Tuladhar, Yoshinori Utsunomiya and Tamon Ueda, “New flexible system of transverse reinforcement for RC piers”, Advances in Structural Engineering, Vol.6, No.3, pp.215-230, 2003.

8、H. Arai, M. Fujita, K. Umezu, H. Fushita and T. Ueda, “Fretting fatigue characteristics in the curved layout of large-capacity prestressing strands”, Journal of Materials, Concrete Structures and Pavements, JSCE, No.627/V-44, pp.205-222, Aug. 1999 (in Japanese)

9、Y. Sato, T. Ueda and Y. Kakuta, “Qualitative evaluation of shear resisting behavior of concrete beams reinforced with FRP rods by finite element analysis”,

     a) Journal of Materials, Concrete Structures and Pavements, JSCE, No.484/V-22, Feb. 1994, pp.51-60 (in Japanese)

     b) Concrete Library International, JSCE, No.24, Dec. 1994, pp.193-209

International conference (keynote speaker)国际会议(大会报告)

---

1、“Towards better structural intervention by external bonding – efficiency, durability and multi-function”, Seventh Asia-Pacific Conference on FRP Structures, Gold Coast, Australia, 10-13 December 2019

2、“Advancement of concrete in Asia: ACMC and ACF”, ACF Symposium 2019, Sapporo, Japan, 10-11 September 2019

3、“Meso-scale modeling for concrete under combined effects of mechanical loading and frost attack”, Symposium on Concrete Modelling, Delft, Netherlands, 27 August 2018

4、“General design approach for ultimate deformation of members with FRP strengthening”, 12^th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures & the 5^th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures Joint Conference, Nanjing, China, 14-16 December 2015

5、“Towards rational structural intervention methods”, 4^th Asian Conference on Ecstasy in Concrete, Kolkata, India, 8-10 October 2015

6、“Structural retrofitting and renovation for sustainable infrastructures”, IABSE-JSCE Joint Conference on Advances of Bridge Engineering III, Dhaka, Bangladesh 21-22 August 2015

7、“Material conditions necessary for strengthening concrete structures”, 2^nd International Conference on Sustainable Civil Engineering Structures and Construction Materials, Yogyakarta, 23-25 September 2014

8、“Debonding in strengthened concrete members”, 6^th International Conference of Asian Concrete Federation, Seoul, Korea, 21-24 September 2014

9、“Ultimate strength and deformation of concrete members strengthened by jacketing with various materials”, 12^th International Conference on Concrete Engineering and Technology 2014, Subang, Selangor Darul Ehsan, Malaysia, 12-14 August 2014

10、“Meso-scale approach for service life prediction of concrete structures under combined effects”, Fourth Asia-Pacific Young Researchers & Graduates Symposium, Hong Kong, 4-5 December 2012

11、“Service life prediction of concrete structures under combined effects”, 1st International Conference on Sustainable Civil Engineering Structures and Construction, Yogyakarta, 11-13 September 2012

12、“Role of Asian Concrete Model Code and JSCE standard specifications for international code harmonization”, Codes in Structural Engineering, Developments and Needs for International Practice, Joint IABSE-fib Conference Dubrovnik 2010, Cavtat Dubrovnik-Neretva County, Croatia, 3-5 May 2010

13、“Structural performance of members strengthened by FRP jacketing with high fracturing strain”, Asia-Pacific Conference on FRP in Structures, Seoul, Korea, 9-11 December 2009.

14、“Rational durability design and maintenance for frost attack and combined effects”, Advances in Concrete Structural Durability, International Conference on Durability of Concrete Structures, Hangzhou, China, 27-28 November 2008

15、“Structural performance and modeling of concrete damaged under combined effects”, Sustainable Concrete Technology and Structures in Local Climate and Environment Conditions, 3^rd ACF International Conference, ACF/VCA, Ho Chi Minh City, 11-13 November 2008

16、“Numerical modelling for concrete and masonry as heterogeneous and discontinuum material”, 6^th International Conference on Analytical Models and New Concepts in Concrete and Masonry Structures, Lodz, Poland, 9-11^th June 2008

17、“Future of FRP in Far East”, Third International IIFC Conference on Composites in Civil Engineering, Miami, USA, 13-15 December 2006

18、“Modeling for frost damage and durability design”, 2^nd ACF International Conference, Bali, Indonesia, 21-22 November 2006

19、“FRP for construction in Japan and its future”, ACECON 2005, Indian Concrete Institute, Mumbai, India, 22-25 September 2005

20、“Durability design of concrete structures in Japan: present and future”, International Conference on Cement Combinations and Durable Concrete, Dundee, UK, 5-7 July 2005

21、“New concept for retrofitting concrete structures with unconventional materials”, Third International Symposium on New Technologies for Urban Safety of Mega Cities in Asia, Agra, India, 18-19 October 2004

22、“Meso-scale approach for prediction of mechanical property and degradation of concrete”, 2nd International Symposium on the Safety Enhancement of Building and Special Works, Seoul, Korea, 16-18 February 2004

23、“New types of continuous fiber reinforcements for concrete members”, Sixth International Symposium on FRP Reinforcement for Concrete Structures, Singapore, 8-10 July 2003

24、“Asian Concrete Model Code – Its role in the region”, 17^th Australasian Conference on the Mechanics of Structures and Materials, Gold Coast, Queensland, Australia, 12-14 June 2002

25、“Concrete Model Code for 21^st Century - ACMC2001”, ICCMC/IBST 2001 International Conference on Advanced Technologies in Design, Construction and Maintenance of Concrete Structures, Hanoi, March 2001

26、“Design Part of Asian Concrete Model Code (ACMC) – performance-based design concept with limit state design methodology –“, International Symposium on Asian Concrete Model Code, Colombo, 27 March 2000

International conference (invited speaker) 国际会议(特邀报告)

---

1、“Unified prediction model of concrete properties under single and combined effects based on meso scale approach”, The 6^th International Conference of Euro Asia Civil Engineering Forum, Green Infrastructure for Future World, Seoul, South Korea, 24 August 2017

2、“International cooperation in Asia for enhancement of technological and educational capacity”, International Forum on Improving the Infrastructure and Internationalization of Civil Engineering Community, Kaohsiung, Taiwan, 7 December 2014

3、“Restoration and strengthening with external bonding”, Seminar on Concrete Damage Assessments, Concrete Repair and Concrete Mix Technology, Hong Kong Concrete Institute, 5 February 2010, Hong Kong

4、“ACMC – performance-based code for design, construction and management”, SUSTAINABLE INFRASTRUCTURE Environment Friendly, Safe and Resource Efficient, IABSE Symposium, Bangkok, September 2009

5、“Disaster prevention of concrete structures by innovative materials and design concept”, International Symposium on Innovation & Sustainability of Structures in Civil Engineering, Shanghai, China, 28-30 November 2007

6、“Towards harmonization of design code in Asia – structural concrete –”, ACECC Workshop on Harmonization of Design Codes in the Asian Region”, Taiwan, 4 November 2006

7、“Do we really know the material properties needed for required structural performances?”, Construction Materials, ConMat ’05 and Mindess Symposium, Vancouver, 22-25 August 2005

8、“FRP for construction in Japan”, JSCE-CICHE Joint Seminar on Concrete Engineering in Mongolia, Ulan Bator, Mongolia, 19 May 2005

9、“JSCE new standard specification for concrete structures”, 3^rd Asian Concrete Forum, Pune, India, 18 September 2003

10、“Asian Concrete Model Code – Its role to the region and relation to ISO – “, Structural Engineers World Congress 2002, Yokohama, Japan, October 9-12, 2002

11、“JSCE attempt at unified code for hybrid structures with performance-based design concept”, US-Japan Seminar on Advanced Stability and Seismicity Concept for Performance-based Design of Steel and Composite Structures, Kyoto, Japan, 23-26 July 2001

12、“Codes and standards for FRP as structural material in Japan”, Composites in Construction – A Reality, International Workshop, ASCE, Capri, Italy, July 2001

Books and Editional work编写教材及专著

---

1、A.F.M. Saiful Amin, Yoshiaki Okui, Md. Abdur Rahman Bhuiyan and Tamon Ueda (Editors), “Towards Owing a Resilient Infrastructure”, Proceedings of IABSE-JSCE Joint Conference on Advances in Bridge Engineering – III, Bangladesh Group of IABSE and Japan Society of Civil Engineers, August 2015, 651 pages.

2、UEDA Tamon, “Japanese Bridge Company to World Company”, Great Prediction for Bridges, Kyoryo Shimbunsha, 1st March 2013, pp.10-11 (in Japanese).

3、Dawei Zhang and Tamon Ueda, “Interface and Beam Behavior of PCM-Strengthened Concrete”, Lambert Academic Publishing, 2012, 70 pages.

4、Tidarut Jirawattanasomkul, Tamon Ueda and Dawei Zhang, “Reinforced Concrete Members with and without Seismic Retrofitting”, Lambert Academic Publishing, 2012, 44 pages.

5、UEDA Tamon, “5.3 ISO Standards”, Textbook for Authorized Concrete Engineers Training, Japan Concrete Institute (JCI), 15th June 2012, pp.144-151 (in Japanese).

6、Jian-Guo Dai and Tamon Ueda, “Chapter 14 Strength and Deformability of Concrete Members Wrapped with Fiber-Reinforced Polymer Composites with a Large Rupture Strain”, Innovative Materials and Techniques in Concrete Construction (Editor: Michael N. Fardis), Springer, 2011, pp.225-241 (379 pages).

7、Masami Fujita, Terumitsu Takahashi, Kazuhiro Kuzume, Tamon Ueda and Akira Kobayashi, “Chapter 3 Strengthening with Prestressed CFRP Strips of Box Girders on the Chofu Bridge, Japan”, Case Studies of Rehabilitation, Repair, Retrofitting, and Strengthening of Structures, Structural Engineering Documents, No.12, IABSE, November 2010, pp.21-33.

8、Hiroshi YOKOTA, Takafumi SUGIYAMA and Tamon UEDA (Editors), “Advances in Concrete Structural Durability”, Proceeding of the 2nd International Conference on Durability of Concrete Structures (ICDCS2010), Hokkaido University Press, November 2010, 714 pages.

9、Tamon UEDA, “11. PROPERTY OF CONCRETE WITH FROST DAMAGE AND MODELLING”, Handbook of Concrete Durability (In memory of Ha-Won Song) edited by S.-H. Kim and K.Y. Ann, Middleton Publishing Inc., pp.447-514, 2010.

10、Wei-Liang JIN, Tamon UEDA and P A Muhammed BASHEER (Editor), “Advances in Concrete Structural Durability”, Proceedings of International Conference on Durability of Concrete Structures (ICDCS2008), Zhejiang University Press, November 2008, Vol.1 and 2, 1365 pages.

11、Zhao Tie-jun, Wittmann Folker H. and Ueda Tamon (Co-editors), “Durability of Reinforced Concrete under Combined Mechanical and Climatic Loads”, Proceedings of an International Workshop on Durability of Reinforced Concrete under Combined Mechanical and Climatic Loads, Qingdao Technological University, Qingdao, China, 27-28 October 2005, Aedificatio Publishers, October 2005.

12、UEDA Tamon, “Diagnosis and Measures in Maintenance of Concrete Structures”, Recycle & Tune, Hokkaido Doboku Kogyo Shimbun-sha Co. Ltd., Sapporo, pp.73-80, September 2002 (in Japanese).

13、T. Ueda, “Seismic design of geotechnical structures (3.2 Material properties and models for reinforced concrete members and 3.4 Material properties and models for seismically retrofitted members)”, Geotechnical Engineering and Practice Series, No.13, Japan Society for Geotechnical Engineering, pp.95-113 and pp.137-139, January 2001 (in Japanese)

14、T. Ueda et al as editor (Main translator: S. Ikeda), “Eugene Freyssinet”, Originally written by Jose A Fernandez Ordonez, Kensetsu Tosho, pp.79-94, May 2000 (in Japanese)

15、T. Ueda and Y. Kakuta, “Integration of Structural and Durability Design”, Integrated Design and Environmental Issues in Concrete Technology, Edited by K. Sakai, E & FN SPON, pp.31-39, 1996

16、W. Kanok-Nukulchai, T. Ueda, M. Wieland and R. L. Chauhan (Editors), “Structural engineering and construction -achivement, trends, and challenges-”, Proc. of EASEC-2, Vol.1-3, Jan. 1989

17、T. Ueda, “6.1.1 Characteristics of measurement for concrete and reinforced concrete, and 7.8 Examples of measurement in construction and maintenance of concrete structures*”,Measurement in Civil Engineering, Edited by H. Okamura, New Grand Series of Civil Engineering, Gihodo Shuppan, Sept. 1989, pp.197-201/275-288 (in Japanese)

Granted Patents授权专利

---

1、Rigid connection between steel beam and pile, 登记号: Tokkyo 4644880, 发明人: UEDA Tamon, Hokkaido University、HAN-URA Tsuyoshi and SHIRAISHI Tsuyoshi, Wako-Giken Co.Ltd. 、KAWAJIRI Kazuhiko and KANO Isamu, JFE Engineering Co.Ltd.

2、Rigid connection between structural members,登记号: Tokkyo 5218803,发明人: UEDA Tamon, Hokkaido University、KAWAJIRI Kazuhiko and KANO Isamu, JFE Engineering Co.Ltd. 、HAN-URA Tsuyoshi and KIRIMOTO Yuji, Wako-Giken Co.Ltd

Honors and Awards奖励与荣誉

---

1、Thammasat荣誉奖, 2019

2、JSCE 终身贡献奖,2018

3、fib国际混泥土协会荣誉勋章,2015

4、JCI最佳论文奖,2014

5、ACT杰出论文奖,2013

6、包玉刚首席教授, 浙江大学，2012-2014年

7、APFIS 最佳论文奖,2012年

8、JSCE Yoshida奖,2012年

9、海天学者, 大连理工大学， 2011-2013年

10、ACT杰出论文奖,2011年

11、在2010年9月进行的一项调查中，被e3校友和学生提名为最佳教授,2010年

12、ACT杰出论文奖,2009年

13、JCI优秀功绩奖,2009年

14、ACT,ASCE,2005年度最佳论文奖,2006年

15、FRPRCS-3最佳论文奖,2004年

16、JSCE持续国际贡献奖,2004年

17、Journal of Structural Engineering 2003年度最佳论文奖,2004年

18、ACT杰出文奖,2004年

19、FRPRCS-6最佳论文奖, 2003年

20、JSCE 最佳论文Yoshida 奖, 2003年

21、JPCEA 最佳论文奖,1997年

22、JCI 最佳论文奖, 1995年

23、JPCEA 最佳论文,1992年

24、JCI最佳发表奖,1991年

25、JSCE 优秀论文奖,1984年

26、JCI 最佳论文, 1982年

27、Sakkokai 奖学金,1982-1984年

28、JSCE, Yoshida 奖学金, 1980年

Conference Program Committee Membership学术/社会兼职

---

1. Memberships(成员)

International organization 国际组织机构

（1）American Concrete Institute (ACI): Member (1982-2001)

（2）International Association of Bridge and Structural Engineering (IABSE): Member (1994 To date)

（3）International Committee on Concrete Model Code for Asia (ICCMC): Member (1994-2012), Executive Council Member (2000-2008),Chairman (2004-2008)

（4）International Federation for Structural Concrete (fib): Member (2002 to date), Technical Council Member (2010 to date)

（5）International Institute for FRP in Construction (IIFC): Member (2002 to date), Council Member (2003 to date), Fellow (2004 to date), Advi

（6）sory Committee Chair (2015 to date) and Member (2008 to date), Vice President (2002-2006),

（7）Asian Concrete Federation (ACF): Member (2005 to date), Executive Council Member and Treasurer (2005-2006), Vice President (2009-2010), President (2011-2014), Immediate Past President (2015-2016)

（8）RILEM: Member (2014 to date)

Domestic organization (日本国内组织机构)

（1）Japan Society of Civil Engineers (JSCE): Member (1978 to date), Fellow (2007 to date)

（2）Japan Concrete Institute (JCI): Member (1980 to date), Board member (2006-2008)

（3）Architectural Institute of Japan (AIJ): Member (1987 to date)

（4）The Japan Association for Earthquake Engineering (2001 to date)

（5）Japan Society of Material Science (JSMS) (2005 to date)

（6）The Iron and Steel Institute of Japan (2008 to date)

2. Committee activities (委员会活动)

International committee 国际委员会

（01）Associated member, Committee 215 on fatigue of concrete (ACI, 1984-99)

（02）Secretary, International committee on concrete model code for Asia (ICCMC, 1994-1997)

（03）Member, International committee on concrete model code for Asia (ICCMC, 1994-2012)

（04）Coordinator, Working group on design, International committee on concrete model code for Asia (ICCMC, 1997-99)

（05）Chairman, International committee on concrete model code for Asia (ICCMC, 2004-2010)

（06）Vice-chairman, International committee on concrete model code for Asia (ICCMC, 2000-2004)

（07）Executive council member, International committee on concrete model code for Asia (ICCMC, 2000-2012)

（08）Executive council member (Treasurer), Asian Concrete Federation (ACF, Jan 2005-Dec 2006, Jan 2009-2016)

（09）Treasurer, Asian Concrete Federation (ACF, Jan 2005-Dec 2006)

（10）Vice-president, Asian Concrete Federation (ACF, Jan 2009-Dec 2010)

（11）President, Asian Concrete Federation (ACF, Jan 2011-Dec 2014)

（12）Immediate Past President, Asian Concrete Federation (ACF, Jan 2015-Dec 2016)

（13）Corresponding member, Task Group 2.5 on Bond and material models (fib, 1995 to date)

（14）Member, Commission 8 on Concrete (fib, 1998-2015)

（15）Member, Technical committee 8.2 on Constitutive laws for high strength/high performance concrete (fib, 1999-2015)

（16）Corresponding member, Task Group 2.1 on Serviceability models (fib, 2000 to date)

（17）Member, Special Activity Group 5 on new model code (fib, 2004-2014)

（18）Member, Task Group 2.6 (former Special Activity Group 6) on composite steel-concrete constructions (fib, 2009 to date)

（19）Member, Commission 3 (former Special Activity Group 7) on Existing structures (fib, 2009 to date)

（20）Member, Editorial board for Structural Concrete (fib, 2010 to date)

（21）Member, Technical Council (fib, 2010 to date)

（22）Corresponding Member, Task Group 8.1 on FRP reinforcement for concrete structures (fib, 2012 to date)

（23）Member, MC2020 Core Group (fib, 2015 to 2016)

（24）Convener, Task Group 3.4 on Selection and implementation of interventions / through-life management activities and measures for concrete structures (fib, 2016 to dat                e)

（25）Member, Commission 10 on Model Code (fib, 2016 to date)

（26）Member, Task Group 10.1 (fib, 2016 to date)

（27）Chair, Action Group on Fatigue (AG11) (fib, 2016 to date)

（28）Vice-president, International Institute for FRP in Construction (IIFC, 2003-2006)

（29）Council member, International Institute for FRP in Construction (IIFC, 2003 to date)

（30）Fellow, International Institute for FRP in Construction (IIFC, 2004 to date)

（31）Advisory Committee member, International Institute for FRP in Construction (IIFC, 2008 to date)

（32）Chair of Advisory Committee, International Institute for FRP in Construction (IIFC, 2015 to date)

（33）Member, RILEM TC “FRP-concrete bond in structural strengthening and rehabilitation” (2004 to date)

（34）Member, RILEM TC “Modelling of life time of concrete under different types of frost and de-icing salt attack” (2004 to date)

（35）Vice Chair, International Steering Committee, East Asia and Pacific Conference on Structural Engineering and Construction (EASEC) (2016 to date)

（36）Member, Editorial Committee for Composites in Construction (ASCE, 2001 to date)

（37）Member, Editorial Board of International Journal of Concrete Structures and Materials (IJCSM), (Korea Concrete Institute or KCI, 2007 to date)

（38）Editor, FRP International (1999-2003)

（39）Member, ISO/TC 71 “Concrete, reinforced concrete and prestressed concrete” (ISO, 2001 to date)

（40）Chair, ISO/TC71/SC7 “Maintenance and repair of concrete structures” (ISO, 2010 to date)

（41）Secretary, ISO/TC 71/SC7 “Maintenance and repair of concrete structures” (ISO, 2004-2009)

（42）Member, ISO/TC71/SC6 “Non-traditional reinforcing materials for concrete structures” (ISO, 2003 to date)

（43）Member, ISO/TC71/SC4 “Performance requirements for structural concrete” (ISO, 2001 to date)

（44）Invited member, WC8 “Operation, Maintenance and Repair” (IABSE, 2005-2007)

（45）Member, WC8 “Operation, Maintenance and Repair” (IABSE, 2007 to date)

（46）Member, International Steering Committee (EASEC, 2013 to date)

（47）Member, Committee on revision of standard specification of concrete structures (JSCE, 1984-86, 1990-91, 1992-94)

（48）Member, Committee on structural mechanics (JSCE, 1985-87)

（49）Member, Committee on steel-concrete composite construction (JSCE, 1985-87)

（50）Member, Committee on review of references (JSCE, 1985-87)

（51）Secretary, Committee on study of construction method with stay-in-place prestressed concrete panel (JSCE, 1985-87)

（52）Secretary, Committee on English translation of standard specification of concrete structure (JSCE, 1986-88)

（53）Secretary, Selection committee on annual prize for best paper (JSCE, 1990-92)

（54）Member, Research committee on hybrid structure (JSCE, 1990-93)

（55）Secretary, Research committee on steel-concrete sandwich structure (JSCE, 1990-92)

（56）Member, Editorial committee on journal of structural engineering (JSCE, 1990-96)

（57）Member, Editorial committee on concrete library international (JSCE, 1991-94, 1997-99)

（58）Member, Research committee on continuous fiber reinforcing material (JSCE, 1992-94)

（59）Member, Working group on ultimate strength of composite structure, Research committee on ultimate strength of steel structure (JSCE, 1993-96)

（60）Secretary, Joint committee on steel-concrete composite structure (JSCE, 1994-2003)

（61）Vice-chairman, Joint committee on steel-concrete composite structure (JSCE, 2003-2005)

（62）Secretary, Committee on hybrid structure (JSCE, 1995-97)

（63）Secretary, Committee on automatic enclosed welding joint (JSCE, 1995-97)

（64）Member, Working group, Special investigation committee on Great Hanshin-Awaji Earthquake (JSCE, 1995-96)

（65）Member, Editorial committee for investigation report on Great Hanshin-Awaji Earthquake (JSCE, 1995-97)

（66）Member, Committee on standard specification of concrete structures (JSCE, 1995-99)

（67）Coordinator, Working group on study on seismic retrofit of bridge pier and others, Joint committee on steel-concrete composite structure (JSCE, 1996-98)

（68）Coordinator, Editorial committee on journal of structural engineering (JSCE, 1996-98)

（69）Chairman, Committee on retrofit design (JSCE, 1996-2000)

（70）Member, Working group on serviceability, Committee on standard specification of concrete structures (JSCE, 1996-99)

（71）Member, Managing committee on structural engineering (JSCE, 1997 to 2001)

（72）Coordinator, Working group of retrofit design part, Committee on standard specification of concrete structures (JSCE, 1998-99)

（73）Member, Working group on construction part, Committee on standard specification of concrete structures (JSCE, 1998-99)

（74）Secretary, Committee on upgrading of concrete structures with FRP sheet (JSCE, 1998-2000)

（75）Coordinator, Working group on composite beam, Joint committee on steel-concrete composite structure (JSCE, 1999 to 2002)

（76）Member, Editorial committee on journal of JSCE (JSCE, 1999 to 2001)

（77）Member, Working group on revision of design part, Committee on revision of standard specification for concrete structures (JSCE, 1999 to 2002)

（78）Coordinator, Sub-working group 3, Working group on revision of seismic design part, Committee on revision of standard specification of concrete structures (JSCE, 1999

              to 2002)

（79）Member, Executive committee, Concrete committee (1997 to date)

（80）Member, Committee on structural engineering (2000 to 2013)

（81）Chairman, Executive committee for Committee on structural engineering (2003-2005)

（82）Member, Committee on FRP bridge technology (JSCE, 2004-2006)

（83）Member, Editorial committee on journal of materials, concrete structures and pavements (JSCE, 1999 to 2001)

（84）Member, Working group on academic affairs, Committee on Annual Convention (JSCE, 2001 to 2002)

（85）Chairman, Committee on English Version of Concrete Standard Specification (JSCE, 2002-2004)

（86）Chairman, Committee on usage of innovative structural materials (JSCE, 2004-2007)

（87）Member, Committee on splice joints (JSCE, 2005-2008)

（88）Member, Committee on hybrid structures (JSCE, 2005 to date) and Chair (2005 to 2007)

（89）Chairman, Committee on hybrid technology with new materials (JSCE, 2005-2008)

（90）Member, Committee on Revision of Standard Specification (JSCE, 2005-2007)

（91）Member, Committee on Award (JSCE, 2006-2008, 2011-2013, 2017-2019)

（92）Member, Committee on Selection of Board Member Nominee (JSCE, 2006-2008, 2017-2019)

（93）Member, Committee on Yoshida Prize (JSCE, 2006 to date)

（94）Member, Committee on Standard Specification for Common Part (JSCE, 2006-2008)

（95）Member, Committee on Plan for Standard Specification of Concrete Structures (JSCE, 2007-2008)

（96）Member, Committee on Stainless Steel Reinforcement (JSCE, 2007-2008)

（97）Member, Committee on Epoxy-coated Prestressing Tendon (JSCE, 2008-2010)

（98）Chairman, Committee on Standard Specification for Hybrid Structures (JSCE, 2008-2010)

（99）Chairman, Committee on English Version of Standard Specification on Concrete Structures (JSCE, 2008-2011)

（100）Member, Committee on Standard Specification of Concrete Structures (JSCE, 2008 to date)

（101）Chairman, Research Committee on Hybrid Technology with Resin Materials (JSCE, 2009-2012)

（102）Member, Board of Directors (JSCE, 2011-2013)

（103）Vice President, Board of Directors (JSCE, 2017 to date)

（104）Chairman, International Affairs Committee (JSCE, 2011 to 2012)

（105）Member, Strategy Meeting on Internationalization of Civil Engineering (JSCE, 2011-2012)

（106）Member, Committee on Operation of Organization for Promotion of Civil Engineering Technology (JSCE, 2011-2013, 2017 to date)

（107）Member (Division Coordinator), Strategic Committee on 100th Anniversary (JSCE, 2011-2012)Senior Director, International Activities Center (JSCE, 2012 to date)

（108）Advisor, Organizing Committee on 100th Anniversary MemorialEvents (JSCE, 2012-2014)

（109）Member, Strategic Committee on Internationalization of Civil Engineering (JSCE, 2013 to date)

（110）Member, Planning Committee (JSCE, 2017-2018)

（111）Vice-chair, Planning Committee (JSCE, 2018-2019)

（112）Member, Organizing Committee for JSCE 2002 Annual Conference (2001-2002)

（113）Chair of Subcommittee on Academic Affairs, Organizing Committee for JSCE 2010 Annual Conference (2009-2010)

（114）Advisor, Organizing Committee for JSCE 2018 Annual Conference (2017-2019)

（115）Member, Secretary meeting (JSCE Hokkaido Chapter, 1994-96, 1999-2001)

（116）Member, Committee on selection of technological chapter award (JSCE Hokkaido Chapter, 2006-2008)

（117）Member, Council (JSCE Hokkaido Chapter, 2006 to 2013)

（118）Member, Research committee on precast concrete structure (JCI, 1985-87)

（119）Member, Research committee on ductility evaluation of RC structures (JCI, 1985-87)

（120）Secretary, Committee on review of references (JCI, 1985-87)

（121）Member, Referee committee on papers for annual convention (JCI, 1986-87)

（122）Member, Organizing committee on annual conference (JCI, 1990-91)

（123）Member, Research committee on repair work of concrete structure (JCI, 1990-95)

（124）Member, Research committee on application of fracture mechanics (JCI, 1991-93)

（125）Secretary, Research committee on concrete model code for Asia (JCI, 1992-94)

（126）Member, Editorial working group on Transactions of JCI (JCI, 1993-96)

（127）Secretary, Research committee on concrete model code (JCI, 1994-97)

（128）Member, Research committee on continuous fiber reinforced concrete (JCI, 1995-98)

（129）Coordinator, Local organizing committee for FRPRCS-3 (JCI, 1995-97)

（130）Member, Editorial committee on concrete journal (JCI, 1995-97)

（131）Member, Referee committee on proceedings of JCI (JCI, 1995-97)

（132）Associated member, Local organizing committee for FRAMCOS-3 (JCI, 1996-98)

（133）Member, Selection committee on candidate for directors (JCI, 1996-98)

（134）Member, Working group 2, Committee on ISO/TC71 (JCI, 1996 to date)

（135）Member, Mirror Committee on ISO/TC71 (JCI, 2000 to date) and Secretary (2000 to 2003), Vice-chairman (2006-2008), Chairman (2008 to 2012)

（136）Coordinator, Working group 3, Committee on ISO/TC71 (JCI, 2003 to 2005), Member (2006 to date)

（137）Member, Working group 4, Mirror Committee on ISO/TC71 (JCI, 2005 to date)

（138）Coordinator, Working group 4, Mirror Committee on ISO/TC71 (JCI, 2016 to date)

（139）Coordinator, Research committee on unified code for design and construction of civil and architectural concrete structures (JCI, 1999 to 2001)

（140）Member, Organizing Committee on Annual Conference 2001 (Sapporo) (JCI, 2000 to 2001)

（141）Member, Working group on memorial events, Committee on Annual Conference 2001 (Sapporo) (JCI, 2000 to 2001)

（142）Member, Committee on international activities (JCI, 2000 to 2014)

（143）Coordinator, Working group on JCI-KCI Joint Seminar (JCI, 2004)

（144）Member, Committee on international information transfer (JCI, 2000 to 2002)

（145）Member, Committee on 21st century memorial event (JCI, 2000 to 2001)

（146）Member, Working group on Asian concrete forum (JCI, 2000 to 2001)

（147）Chairman, Committee on Asian Concrete Model Code (JCI, 2001 to 2003), Member (JCI, 2003 to 2015)

（148）Chairman, Research committee on retrofit technology for concrete structures (JCI, 2001-2003)

（149）Member, Research committee (JCI, 2001-2003)

（150）Member, Editorial committee on Advanced Concrete Technology (JCI, 2002-2013)

（151）Member, Working Group for Asian Concrete Federation (JCI, 2005-2009)

（152）Member, Committee on 40th anniversary (JCI, 2005-2006)

（153）Member, Board of Directors (JCI, 2006-2008)

（154）Member, Committee on examination for licensed concrete engineer (JCI, 2006-2008)

（155）Member, JCI-KCI Joint Committee on Performance Assessment (JCI, 2006-2009)

（156）Member, Committee on JCI award (JCI, 2007-2009)

（157）Member, Organizing Committee on Annual Conference in Sapporo (JCI, 2008-2009)

（158）Secretary, Committee on Guidelines for Performance Assessment of Existing Structures (JCI, 2009 to date)

（159）Advisor, Mirror Committee on Asian Concrete Federation (JCI, 2009 to date)

（160）Member, Expanded secretary meeting (JCI Hokkaido chapter, 1993-2000)

（161）Member, Executive committee (JCI Hokkaido chapter, 2000 to 2012)

（162）Secretary, Research committee on hybrid structure (JCI Hokkaido chapter, 1993-97)

（163）Member, Research committee on new material (JCI Hokkaido chapter, 1993-97)

（164）Member, Research committee on recycle in concrete technology (JCI Hokkaido chapter, 1995-99, 2000-2005)

（165）Member, Committee on preparation of JCI 2001 convention (JCI Hokkaido chapter, 1999-2000)

（166）Chairman, Research committee on recycle in concrete technology (JCI Hokkaido chapter, 2004-2005)

（167）Chairman, Research committee on application of recycled aggregate (JCI Hokkaido chapter, 2005-2007)

（168）Secretary, Research committee on retrofit and repair of concrete structure (JCI Hokkaido chapter, 1997-99)

（169）Member, Research committee on durability design for concrete structures with frost damage (2004 to date)

（170）Member, Committee on prestressed concrete containment structures for storage of refrigerated liquefied gases (JPCEA, 1985-87)

（171）Chairman, Committee on performance-based design for prestressed concrete structures (JPCEA, 2003-2007)

（172）Corresponding member, Committee on Application of High Strength Prestressing Tendon to Prestressed Concrete Structures (JPCEA, 2009 to 2011)

（173）Member, Committee on design details (Association for Civil Engineering Technology of Hokkaido, 1994 to date)

（174）Coordinator, Working group on durability design with continuous fiber reinforcement (Association for Civil Engineering Technology of Hokkaido, 2003-2005)

（175）Member, Committee on international activities (Association for Civil Engineering Technology of Hokkaido, 1999 to 2018)

（176）Chair, Committee on planning (Association for Civil Engineering Technology of Hokkaido, (2012 to 2018) and Member (1999 to date)

（177）Member, Committee on disaster mitigation facility (Association for Civil Engineering Technology of Hokkaido, 2004 to date)

（178）Chairman, Concrete Research Committee (Association for Civil Engineering Technology of Hokkaido, 2012 to 2018) and Executive Member (1991 to date)

（179）Chair, Executive Committee (Association for Civil Engineering Technology of Hokkaido, 2012 to 2018), and Member (1999 to date)

（180）Chairman, Committee on UFC (Association for Civil Engineering Technology of Hokkaido, 2012 to 2014)

（181）Member, Committee on structure (Association for submerged tunnel, 1991-95)

（182）Member, Local organizing committee for IABSE Tokyo symposium, Tokyo (IABSE Japan chapter, 1985-86)

（183）Member, Local organizing committee for EASEC-2 (AIT, 1988-89)

（184）Member, Investigation committee on panel system caisson (Ministry of Transport, 1992-97)

（185）Member, Technological investigation committee on Shikari Ohashi bridge (Hokkaido Development Bureau, 1995-2000)

（186）Member, Investigation committee on steel-concrete hybrid structure (Japan Highway Corporation, 1995-98)

（187）Member, Technological investigation committee on Tokachi Ohashi bridge (Hokkaido Development Bureau, 1995-98)

（189）Member, Investigation committee on construction work of Obihiro viaduct (Tekken Construction Co. Ltd., 1994-97)

（190）Member, Investigation committee on Shinkotoni viaduct (Taisei Corporation, 1997-2000)

（191）Member, Working group on application to cement and concrete (Hokkaido Electric Power Co. Ltd., 1999-2005)

（192）Member, Secretary group, Committee on design basis for civil and architectural structures (Ministry of Construction, 2000-2002)

（193）Secretary, Committee on Design Standard for Railway Concrete Structures (Ministry of Transport, 2000-2004)

（194）Member, Technical committee on Kitago Viaduct (Sapporo City, 2001-2004)

（195）Secretary, Civil Engineering Field of Japanese Supporting University Consortium for AUN/SEED-Net Project (JICA, 2003-2008, 2013-2014)

（196）Member, Japanese Supporting University Consortium for AUN-SEED-Net Project (JICA, 2005 to date)

（197）Field Management Chief for Civil Engineering, Japanese Supporting University Consortium for AUN-SEED-Net Project (JICA, 2005 to date)

（198）Chief Advisor and Acting Executive Director for AUN-SEED-Net Project (JICA, 2014 to date)

（199）Director General, Hokkaido Natural Disaster Science Data Center (2012 to 2014) and Executive Member (2004 to date)

（200）Member, Committee on Internationalization of Codes in Asia-Pacific Region (JSA, 2002-2003)

（201）Chairman, Technical committee on Kariki 5 go kyo bridge (Wako Giken, 2003 to 2005)

（202）Member, Committee on seismic design of bridges with consideration of cost reduction (JH, 2004-2006)

（203）Member, Technical committee on incremental launching method for prestressed concrete box girder bridge with corrugated steel web (JH, 2004-2006)

（204）Member, Advisory committee for International Center for Coastal Technology (Coastal Technology Center, 2004 to 2012)

（205）Member, Committee on road maintenance technology (Hokkaido Road Maintenance Technology Center, 2004 to date)

（206）Member, Working group on seismic resistance of large-scale bridges (Hokkaido Road Maintenance Engineering Center, 2004-2008)

（207）Chairman, Committee on quality assurance of superstructure of Kiroro Bridge (Hokkaido Road Maintenance Engineering Center, 2006-2008)

（208）Chairman, Committee on construction of Shin-Otanoshike Viaduct (JR Hokkaido, 2007-2009)

（209）Member, Advisory Panel on Preventive Maintenance of Highway Bridges (Ministry of Land, Infrastructure and Transport, 2007-2008)

（210）Member, Sapporo City Panel on Repair Plan of Long Life of Bridge (2008-2010)

（211）Member, Advisory Panel on Repair Plan for Long Life of Bridge (Hokkaido Development Bureau, Ministry of Land, Infrastructure, Transport and Tourism, 2009 to date)

（212）Representative member, Examination Committee on General Evaluation for Hidaka Branch Office, Hokkaido (2009 to date)

（213）Representative member, Examination Committee on General Evaluation for Iburi Branch Office, Hokkaido (2009 to date)

（214）Representative member, Examination Committee on General Evaluation for Muroran Civil Engineering Office, Hokkaido (2009 to date)

（215）Chairman, Committee on Design Standard for Railway Hybrid Structures (Ministry of Land, Infrastructure, Transport and Tourism, 2010 to 2013)

Other activities( 其他兼职)

1. Activities on campus(校园活动组织兼职)

（01）Secretary, Committee on international exchange activities (Faculty of Engineering, University of Tokyo, 1984-86)

（02）Member, Committee on editing of publications (Faculty of Engineering, University of Tokyo, 1986-87)

（03）Member, Campus planning committee (AIT, 1987-89)

（04）Member, Working group of academic development and review committee (AIT, 1989)

（05）Member, Committee on public relations (Faculty of Engineering, Hokkaido University, 1993-95)

（06）Member, Committee on academic affairs (Graduate School of Engineering, Hokkaido University, 1997-1998)

（07）Member, Working group on entrance examination (Graduate School of Engineering, Hokkaido University, 1999)

（08）Member, Working group on preparation of English course (Graduate School of Engineering, Hokkaido University, 1998-1999)

（09）Member, Representative group for English program for socio-environmental engineering (EGPSEE) (Graduate School of Engineering, Hokkaido University, 1999-2003)

（10）Member, Committee on Taiken-nyugaku (Faculty of Engineering, Hokkaido University, 2002)

（11）Member, Committee on curriculum (Faculty of Engineering, Hokkaido University, 2005-2006)

（12）Member, Committee on general academic affairs (Faculty of Engineering, Hokkaido University, 2005-2006)

（13）Member, Research strategic plan (Graduate School of Engineering, Hokkaido University, 2006-2008)

（14）Member, Committee on scientific matters (Gakujutsu Iinkai) (Graduate School of Engineering, Hokkaido University, 2006-2008)

（15）Member, WG on technical staff (Faculty of Engineering, Hokkaido University, 2007-2008)

（16）Head, Division of Built Environment (Graduate School of Engineering, Hokkaido University, FY2007)

（17）Head, Department (Program) of Civil Engineering (School of Engineering, Hokkaido University, FY2008-FY2009)

（18）Member, Committee on English Program (Graduate School of Engineering, Hokkaido University, 2007-2008)

（19）Member, Working Group, Committee on English Program (Graduate School of Engineering, Hokkaido University, 2007-2013)

（20）Member, Committee on English Program (Graduate School of Engineering, Hokkaido University, 2010-2013)

（21）Member, Project Team for Global 30 (Office of International Affairs, Hokkaido University, 2009-2010)

（22）Member, Working Group on Education for Foreign Language (Institute for the Advancement of Higher Education, Hokkaido University, 2009 to 2019

（23）Head, Working Group, Committee on English Program (Graduate School of Engineering, Hokkaido University, 2010-2013)

（24）Member, Counselor for admission of Admission Center (Admission Center, Hokkaido University, 2010 to 2019)

（25）Member, Safety and Health Office (Faculty of Engineering, Hokkaido University, 2011 to 2013)

（26）Member, Admission Office (Faculty of Engineering, Hokkaido University, 2011 to 2014)

（27）Director, International Exchange Office (Faculty of Engineering, Hokkaido University, 2012-2014)

（28）Member, International Exchange Office (Faculty of Engineering, Hokkaido University, 2010 to 2012, 2014 to 2019)

（29）Member, Committee on Students (Faculty of Engineering, Hokkaido University, 2014-2016)

（30）Group head, Safety and Health Office (Faculty of Engineering, Hokkaido University, 2014-2017)

（31）Member, Committee for Faculty Members in Charge of International Activities (International Affairs Office, Hokkaido University, 2014 to 2019)

（32）Member, Executive Committee for Safety and Health (Hokkaido University, 2015-2017)

（33）Member, Evaluation Committee (Faculty of Engineering, Hokkaido University, 2015-2016)

（34）Member, Personnel Review Committee (Faculty of Engineering, Hokkaido University, 2015-2016)

（35）Head, Division of Engineering and Policy for Sustainable Environment (Faculty of Engineering, Hokkaido University, 2015-2016)

Vacancies招聘与招生

---

招收博士、硕士研究生:

1.具有相关学科(土木工程或相关工程/科学领域)学位；

2.良好的英语沟通能力和较强的研究能力；

3.有国际工作经验者优先。

招聘专职研究员和博士后:

1.具有相关学科(土木工程或相关工程/科学领域)博士研究生学历及博士学位，承担过基础设施生命周期管理技术研发工作；

2.良好的英语沟通能力，有教学经验和较强的研究能力；

3.在SCI期刊上发表论文多篇，足以满足国际一流大学相关学术职称(助理教授/副教授/正教授)的要求；

4.有国际工作经验者优先。